Sunday, March 10, 2013

Gabby Giffords's Husband Buys AR-15

I am confused here. An avowed anti-gun guy who purchases an AR-15 and a 1911 pistol. He says its to show how easy it is to get through the background check. This still doesn't make sense...personally I think he wanted the AR and the pistol...what do you think of this?

 
The Story
 


Mark E. Kelly, gun-control proponent and husband to former Congresswoman Gabby Giffords, recently purchased an AR-15 (an "assault weapon," he called it)—which he now says he intended as an illustration of the need for more stringent gun laws.


Kelly reportedly bought the AR-15 and a 1911-style semi-automatic pistol at a gun store in Tucson, Arizona.

Breitbart News received a tip on this when Neil McCabe, editor of Guns & Patriots newsletter, contacted us on March 7 and said:

Mark E. Kelly, made purchases which included an AR-15--sometimes described as an "assault rifle"--at 3:30 pm on the afternoon of March 5 at Diamondback Police Supply, 170 S. Kolb Street, Tucson, AZ.

According to McCabe, witnesses to the purchases claimed Kelly purchased "high capacity" magazines as well.

On March 6, McCabe contacted Kelly's gun control group--"Americans for Responsible Solutions"--and on March 8 they replied that his message had been passed on to colleagues who handle press requests. Breitbart News then began investigating the details surrounding the purchase, including visiting the gun store.

Suddenly, Kelly announced on his Facebook page that he was not going to keep the AR-15, which he has yet to pick up from the store.

Days after making the purchases, Kelly wrote on Facebook:

I just had a background check a few days ago when I went to my local gun store to buy a .45. As I was leaving, I noticed a used AR-15. Bought that too. Even to buy an assault weapon, the background check only takes a matter of minutes. I don't have possession of it yet but I'll be turning it over to the Tucson PD when I do.

Testifying to the Senate Judiciary Committee Jan. 30, Kelly had urged senators to restrict sales firearms based on their lethality--a common refrain with other witnesses that day, who argued that semi-automatic weapons, which chamber subsequent rounds as bullets are fired, and other guns with military-style features level the playing field against law enforcement.

Kelly and Giffords founded their own advocacy group to restrict gun rights, Americans for Responsible Solutions, in January. On its website, ARS wrote: “High capacity magazines are a deadly factor in gun violence.” A 30-round magazine is considered a high-capacity magazine.

The ARS website says: “Congress should act to limit the sale of high capacity magazines, which are not needed for hunting or self-defense, but have proven very lethal.”

Similarly, the ARS website says: “Congress should act to limit the sale of assault weapons.

In February, Kelly told Fox News Sunday's Chris Wallace that lawmakers need to address "assault weapons." He said the purpose of an "assault weapon" is "to kill a lot of people very quickly," and he lamented that such products were "too readily available."

Kelly has not commented on whether he will also return the .45 caliber semi-automatic pistol he purchased.

Photo: Captain Mark Kelly/Facebook

This post has been updated.

http://www.breitbart.com/Big-Government/2013/03/09/Gabby-Giffords-Husband-Buys-AR-15-Announces-He-s-Not-Keeping-It-After-News-Leaks-Out

Saturday, March 9, 2013

More Anti-Second Amendment Stupidity

 

I posted this "Acclaimed Professors" contact info at the head of his racial blathering. Feel free to contact him and give a clear voice.
 

The Second Amendment Was Primarily To Enforce The Slavery Regime

 
 
 
Ezrah Aharone is an adjunct associate professor at Delaware State University and the author of two acclaimed political books: Sovereign Evolution: Manifest Destiny from Civil Rights to Sovereign Rights  and Pawned Sovereignty: Sharpened Black Perspectives on Americanization, Africa, War and Reparations. He can be reached at www.EzrahSpeaks.com
 
 


Thursday, March 7, 2013

They Missed It!

Ok, so like you I have read the article that Roger Ailes, who ran Fox News. Ailes is certainly a heavyweight in the news business. Then something caught my eye...and later it begged some more thought. I have highlighted the text I'm referring to in red. Read it and see for yourself.

I think that Obama is a liar. I don't say that lightly, I say it as a description of his personality. I believe he has mislead us since day one, and we as a nation have bought into it.

I honestly believe we are in deep trouble, far deeper than we realize.

Roger Ailes: Obama Is ‘Lazy,’ Biden ‘Dumb As an Ashtray’

Wednesday, 06 Mar 2013 03:02 PM
By Bill Hoffmann

 
Fox News chief Roger Ailes says President Barack Obama is “lazy’’ and claims the commander-in-chief “never worked a day in his life,’’ a controversial new book claims.

Ailes also takes shots at Vice President Joe Biden, saying, “he’s as dumb as an ashtray,” and at Newt Gingrich, who he says is a “sore loser.”

In his upcoming biography, “Roger Ailes: Off Camera,’’ author Zev Chafets writes that Ailes reacted to a crack by Democratic strategist Hilary Rosen that Ann Romney, wife of last year’s Republican presidential candidate, “never worked a day in her life,” with his own blunt opinion of the president.

“Obama’s the one who never worked a day in his life. He never earned a penny that wasn’t public money,’’ Ailes said, according to Chafets.

“How many fundraisers does he attend every week? How often does he play basketball and golf? I wish I had that kind of time. … He’s lazy, but the media won’t report that.”

Ailes insists, however, that he didn’t come up with Obama’s “lazy’’ tag — but rather the president did himself during a 2011 interview with Barbara Walters in which he described his most deplorable trait as “deep down, underneath all the work I do, I think there’s a laziness in me.’’

Ailes, who granted Chafets one-on-one interviews for the biography, also takes the gloves off on Vice President Joe Biden.

“I have a soft spot for Joe Biden. I like him. But he’s dumb as an ashtray,’’ Ailes says, according to the book, which is published by Penguin Sentinel and excerpted on VanityFair.com.

Chafets’ biography shows there’s no love lost between Ailes and Obama and details a testy sit-down between the two during the 2008 presidential campaign in which the future commander-in-chief lit into Sean Hannity.

“Obama was upset by Fox News,’’ writes Chafets. In a private room at the Waldorf Astoria hotel in Manhattan, “Obama arrived with his aide Robert Gibbs, who seated Ailes directly across from Obama, close enough for Ailes to feel the intention was to intimidate him.

“[Ailes] didn’t mind; in fact, he rather appreciated the stagecraft, one political professional to another.’’

Chafets says after some pleasantries, “Obama got to the point. He was concerned about the way he was being portrayed on Fox, and his real issue wasn’t the news; it was Sean Hannity, who had been battering him every night.

“Ailes didn’t deny that Hannity was anti-Obama. He simply told the candidate not to worry about it.

Ailes is quoted as responding: “Nobody who watches Sean’s going to vote for you, anyway.”

According to Chafets, Obama then asked Ailes what his personal concerns were.

“Ailes said he was mainly concerned about Obama’s strength on national security issues. The candidate assured Ailes that he had nothing to worry about,’’ the author writes.

“‘Well, why are you going around talking about making cuts in weapons systems?’ asked Ailes. ‘If you’re going to cut, why not at least negotiate them and get something in return?’”

Obama said Ailes was misinformed, according to Chafets. “He said this looking me right in the eyes,” says Ailes. “He never dropped his gaze, which is the usual tell. It was as good a lie as anyone ever told me.

“I said, ‘Senator, I just watched someone say exactly that on my computer screen before coming over here. Maybe it wasn’t you, but it sure looked like you and sounded like you. I think it was you.’”

At that point, according to Chafets, “Gibbs stood and announced that the session was over. ‘I don’t think he liked the meeting very much,’ says Ailes.’’


Ailes doesn’t let the GOP get by without some criticism.

Of Gingrich, he says, the former GOP House Speaker is a “sore loser and if he had won he would have been a sore winner.” The book claims Ailes also described Gingrich with an obscenity.

Chafets’ book is one of two new biographies on Ailes. The second is the upcoming “The Loudest Voice in the Room: Fox News and the Making of America,” by New York magazine writer Gabriel Sherman.

Meanwhile, The New York Times reports Ailes himself is writing his autobiography, although no date is set for its release.


Read Latest Breaking News from Newsmax.com http://www.newsmax.com/Newsfront/roger-ailes-obama-lazy/2013/03/06/id/493479#ixzz2MtjPD5Ai
Urgent: Should Obamacare Be Repealed? Vote Here Now!

http://www.newsmax.com/Newsfront/roger-ailes-obama-lazy/2013/03/06/id/493479

Wednesday, March 6, 2013

Two Stories, Two News Sources, We Must Have Two Presidents?!

I read a couple of stories the other day. One from the British paper "The Guardian." the other from another British paper, "The Telegraph."

Both papers talk about our President. It would seem that we have split personality President. I'll let you decide for yourself             

Obama not bluffing over Iran military threat, Biden tells Aipac

 
Barack Obama's threats to use military force to prevent Iran securing a nuclear weapon are more than idle bluffs, vice-president Joe Biden told the biggest pro-Israeli lobbying group Aipac on Monday.
Biden said that while the US preferred a diplomatic solution to the standoff with Iran, a military option remained on the table.

"The president of the United States cannot, and does not, bluff. President Barack Obama is not bluffing," Biden told the audience in Washington.

Israel is seeking assurances of support from the US, should it decide to launch air strikes against Iran's nuclear facilities.

There has been scepticism about Obama's commitment to a military option against Iran, given the administration's general unwillingness to be drawn into new conflicts after the experience of the Iraq and Afghanistan wars. Some observers feel that Obama's threat is aimed purely at putting pressure on Iran to resolve the standoff diplomatically and not embark on another conflict.


You can read the rest of the article here

The second story;

Barack Obama a 'dithering, controlling, risk-averse' US president


Barack Obama is a "dithering" president whose controlling tendencies and extreme risk-averse attitude to foreign policy has damaged US interests in the Middle East, according to a new book by a senior former State Department adviser.


The insider-account of the damaging divisions between the White House and the State Department comes as diplomats around the world wait to see if John Kerry, the new US secretary of state, can persuade Mr Obama to greater engagement on Syria, Egypt and the wider Middle East.
Vali Nasr, a university professor who was seconded in 2009 to work with Richard Holbrooke, Mr Obama's special envoy to Afghanistan and Pakistan, records his profound disillusion at how a "Berlin Wall" of domestic-focused advisers was erected to protect Mr Obama.
"The president had a truly disturbing habit of funnelling major foreign policy decisions through a small cabal of relatively inexperienced White House advisers whose turf was strictly politics," Mr Nasr writes in The Dispensable Nation: America Foreign policy in Retreat.


The Rest of the Story is Here

Any thoughts?



Monday, March 4, 2013

Post-Constitutional America: The Trap is Closing


Post-Constitutional America: The Trap is Closing
article by Peter Farmer

“A government big-enough to give you everything you want, is big-enough to take everything that you have.” —President Gerald Ford, Address to Joint Session of Congress, 12 August 1974

By tradition, Americans are accustomed to referring to themselves as free citizens of a constitutional republic, and not subjects of an all-powerful ruler or state. Today, however, evidence continues to mount that we are no longer a free people and no longer live in a constitutional republic.

 The increasing size and scope of government at all levels has been a fact of life in the United States for quite some time, but in recent years – especially since the September 11th 2001 terrorist attacks – that growth has accelerated dramatically. Under the Obama regime, it has gone exponential.


During the First World War, Randolph Bourne famously stated “War is the health of the state.”
How prescient his words remain almost a century after he first uttered them – for a state of war offers nearly-ideal conditions for government to seize and consolidate powers that far-exceed its peacetime boundaries.

In the months following the September 11th attacks, the Bush administration and Congress created the Department of Homeland Security and enacted the Patriot Act. In the panicked, near-hysterical post-attack political climate, the vast new and often extra-constitutional powers assumed by the federal government were deemed a necessary measure, and objections to these developments were brushed aside. A few clear-eyed observers noticed the Orwellian names of the new agencies and laws – a harbinger of things to come – but their warnings were largely ignored.

Whatever the intentions of George W. Bush, there can be little argument that the nescient national security super-state he helped to create has proven to fit the iron fist of his successor, Barack Obama, like a glove. Using a combination of executive orders, unaccountable appointed “czars,” extrapolations and modifications of existing regulations, and old-fashioned political strong-arming, Obama and his ideological comrades have shredded the constitution and seized vast new powers for themselves and the federal government.

Consider the following developments, which have unfolded since the man from Chicago took over in early 2009…
In March, 2012, Obama signed an executive order for the National Defense Resources Preparedness Act, whose language authorizes the White House and cabinet-level departments of the federal government to seize control of any and all food, water, energy, health resources, transportation and “all other materials, services and facilities” in the U.S. that it deems necessary – even if the nation is not experiencing emergency conditions. The NDRPA heavily-modified existing language from E.O. 8248, passed in 1939 during the Franklin D. Roosevelt administration. NDRPA effectively strips Americans of their right to own property and also subjects them to unreasonable search and seizure, a violation of the Fourth Amendment of the Bill of Rights.

Each year, Congress passes a national defense authorization act (NDAA), which appropriates funds for the annual operation of the military and also sets forth modifications to national defense policy. Buried within its pages, the 2012 NDAA contained language authorizing the military to arrest and detain American citizens indefinitely without due process or habeas corpus, if they are suspected of being “terrorists” or what the act terms “covered persons.”

In addition to being a clear violation of the Posse Comitatus Act – which prohibits the U.S. military from conducting combat operations on American soil – the NDAA effectively abolishes the constitutional right to due process. The term “covered persons” is sufficiently vague as to be meaningless and thereby can be stretched to accommodate whatever purpose the government desires. In short, this is bureaucrat-speak for the government giving itself carte blanche to do whatever it pleases, the constitution be damned.

In July, 2012, Small Wars Journal - a mainstream military affairs publication, published an article entitled “Full Spectrum Operations in the Homeland: A Vision of the Future” by Kevin Benson and Jennifer Weber, which considered the prospect of military anti-insurgency operations on American soil; the purported “enemy” under their scenario were “’Tea Party’ insurrectionists.’”

In February 2013, without warning - the Department of Defense took over a Houston-area high school for conducting urban warfare drills; alarmed local residents mistook blank training rounds for actual gunfire. Days earlier, urban warfare drills – including exercises by low-flying Blackhawk helicopters shooting blanks – took place in and over downtown Miami.  Similar exercises have taken place over the last year in fourteen other American cities.

The Department of Homeland Security, the Transportation Security Agency and other parts of the federal government recently have contracted for the purchase of 1.7 billion rounds of ammunition, including a recent purchase of 450 million rounds of .40 caliber hollow-point handgun ammunition.  Under the Geneva Conventions, for humanitarian reasons the use of hollow-point (HP) bullets is prohibited during warfare between nations. However, domestic law-enforcement and other agencies are legally permitted to use HP ammunition. Additionally, DHS, TSA and other agencies have contracted for substantial amounts of 5.56mm rifle ammunition, and other calibers as well. Responding to inquiries, Federal spokespersons have stated that the purchases are routine and for training purposes only. Under analysis, the facts tell a different story…
During the height of combat operations in Iraq, the U.S. military had a monthly small arms ammunition “burn rate” (rate of usage) of approximately 5.5 million rounds of all calibers and types. Using that yardstick, the federal government has recently purchased enough ammunition for a domestic “war” of more than 25 years duration.

Why do these civilian agencies need that much ammunition? Hollow-point bullets are designed explicitly for anti-personnel use. The government claims this ammunition is strictly for target practice and annual qualifications drills. If so, why is so much HP ammunition required?

Are they preparing to fight a war? Do they know something we do not?  It should also be noted that these purchases amount to a form of back-door gun control – via restricting the ammunition supply to the civilian firearms market.

In a related development, the company Law Enforcement Targets, Inc. – which supplies DHS and other agencies with training materials – came under harsh criticism after disclosures that it is marketing a new line of targets call the “No Hesitation” series, which depict images of pregnant women, children and the elderly on marksmanship targets. The existence of such products proves that the government isn’t telling the truth about its motives.

In addition to the foregoing, it has just been disclosed that DHS has purchased 2,717 military-surplus MRAP (i.e., mine resistant ambush protected) armored personnel carriers from the military and is retrofitting them for use with that agency. The 18.9-ton MRAP was designed for service in combat; specifically, to withstand small-arms fire, improvised explosive devices, mines, rocket-propelled grenades and other military-grade threats. Why does a civilian agency of the federal government need such equipment – and in such quantity?
The National Security Administration (NSA), the agency of the government responsible for collecting foreign electronic/signals intelligence and conducting cryptanalysis, is opening a massive new data collection center in Utah. By law, the NSA is limited to conducting foreign signals intelligence activities – but whistle-blowers have come forward to disclose that the data center in Bluffdale, Utah will collect not only foreign signals, but domestic ones as well. When operable, the facility will have the ability to comprehensively collect and store all cell phone, text message, e-mail, and internet search engine traffic – not only collected from other nations, but those originating in the United States.

Americans are - to a large extend unknowingly - being enclosed in a massive surveillance grid being constructed by government and large business concerns.  A national discussion and debate about the wisdom and ethicality of such measures has not occurred. The powers-that-be have simply decided that it is their right to surveil ordinary citizens – and have done so.

Former CIA Director David Petraeus disclosed in an interview shortly before resigning, that transformational new technologies will make it possible for agencies like the CIA to surveil and spy upon ordinary citizens in their own homes, automobiles and places of business, “Items of interest will be located, identified, monitored, and remotely controlled through technologies such as radio-frequency identification, sensor networks, tiny embedded servers, and energy harvesters — all connected to the next-generation internet using abundant, low-cost, and high-power computing.” Common household items/goods such as automobiles, refrigerators, washers-dryers and thermostats will be “chipped,” connected to the internet and mined for data.

Has anyone reminded Petraeus that the Central Intelligence Agency is a foreign intelligence agency, one whose mission does not include spying on Americans in their own homes and communities?

It isn’t only household objects being wired for surveillance, either – but ubiquitous devices in the surrounding outdoor environment, such as streetlights. Streetlights? Yes, that is correct – high-tech streetlights funded by the government are being installed all over the country and have the capability to record both audio and video content. Starting in 2015, electronic data recorders – aka “black boxes” similar to those found in airliners – will be mandatory on all new vehicles – including privately-owned automobiles. These, too, will be linked to the data-collection networks.

Americans have grown accustomed to reading about the use of unmanned aerial vehicles (UAVs) over foreign battlefields, but what about drones over our own soil? Inevitably, these systems have been pressed into use domestically by the Department of Homeland Security and other government agencies, ostensibly only for patrolling our northern and southern borders. However, it has now come to light that DHS is modifying its Predator Type B unmanned aerial vehicles to be used for domestic surveillance. DHS requirements for General Atomics Aeronautical Systems, the contractor doing the modifications, stipulate that the system shall be capable of “identifying a standing human being at night as armed or not” and also of direction-finding and signal capture of mobile phones, two-way radios and other forms of electronic communications. How long before live ordnance is hung beneath the wings of these remotely-piloted aircraft now operating over American soil?

The Founding Fathers, in their wisdom, remind us that the price of liberty is vigilance and that those willing to trade freedom for the illusion of security will end up neither free nor secure.
Patriots, be warned – the trap is closing. America is rapidly becoming a garrison state.

Peter Farmer is a historian and commentator on national security, geopolitics and public policy issues. He has done original research on wartime resistance movements in WWII Europe, and has delivered seminars on such subjects as political violence and terrorism, the evolution of conflict, combat medicine, and related subjects. Mr. Farmer is also a scientist and a medic.

http://www.canadafreepress.com/index.php/article/53534

Wednesday, February 9, 2011

The Troublemaker

My apologies to you. It seems that there are glitches with this particular template set, which puts all of the Troublemaker novel as one long sentence. Grrr!

So it would be best that if you wanted to read all that I have written so far, please go to my alternate blog at:


I'll post chapters as long as you're interested in reading them...then I'll post chapters on my newest book "For The Greater Good"

Sunday, January 10, 2010

Egyptian Pyramids

I watched a show the other week about the Great pyramids in Egypt. I can't explain what clicked on in my head about these things. I mean after all, in the scheme of recent events, they are waaaay down on my "who cares" list.

I just for the life of me cannot wrap my head around the vast numbers of people that it would take to make ONE of these pyramids, much less all of them. Also, the pyramids were carbon dated to have been build BEFORE the Biblical flood of Noah.

Well if you're thinking about this then a couple of questions should be asked.

1. Pre-dating Noah's time would be BEFORE the Bronze age. So how could the ancients create such mathematically perfect structures?

2. Why?

Tuesday, August 18, 2009

Accurizing A CMP M1 Garand - Stock Prep

Stock Prep


The second part of accurizing your rifle is stock preparation. Your CMP stock will be filled with years of dirt, grease and cosmoline. The critical areas of the stock will probably be compressed due to the recoil of the action, so when we remove this inbedded stuff, your wood will change.

Now, I'll admit I can't give every single detail of the M1 Garand...but I do know wood working. Wood, even though it has been shaped and used, will change over time. So the object here is to start from as close to ground zero as we can, then reseal the wood and remove the areas that rub against the barreled action.

There are many differing methods of removing the old finish from a Garand. Some guys will use oven cleaner and some will use furniture paint remover, and some will use the dishwasher.

I used the dishwasher method, and it worked perfectly for me.

I had some photos of that process which I did soon after I got my Garand, and some how I've lost them. However here is a site where they show exactly how that process works.

Remove your metal from the stock. The tricky piece is the band from the upper hand guard. I took a narrow pointed nail punch and secured it into my bench vise then put one of the holes onto it. I was able to remove my band that way. Thinking back on it I don't think I removed the metal from my lower hand guard, I just put that in complete.

Keep in mind that you'll use a regular dishwasher cycle and have it set to 'air dry' not heat dry.

My stock wasn't a historical piece by any stretch of the imagination. It was gouged, dented, dinged and had only one set of numbers beneath the hand grip.

After the cycle was complete, most all of the dents and dings were gone. The cartouche numbers remained, so I was a happy camper.

The wood itself looked totally different after it had been striped this way. A shocking pale gray chunk of lumber. I would have never thought that walnut would have taken on this color.

When you have done this the second thing that you'll notice is that your wood feels really rough. This is normal as the walnut fibers themselves are releasing. This is normal.

Now you'll take some 320 grit wet-dry sandpaper and smooth over the stock and hand guards. After you smooth over with the 320 grit, take some 0000 steel wool and go over it again.

This next part is very important. We will now need to seal the wood...all surfaces, inside the stock and outside. I use Tung Oil. Specifically I use Formby's Traditional Tun Oil Finish, Low Gloss.

Take some 320 grit wet-dry sandpaper, a small bowl to hold some Tung Oil and begin to "wet sand" your stock set. Wet sanding your stock set will create ultra fine particles which will combine with the Tung Oil and help seal better. Your first two coats will probably absorb quickly. Two coats are only needed at this point, we'll do a final finish last.

Now hang your stock set to dry for a day or two.


Here is what I started with:





Here is what I finished with:





Now that your stock is dry, put everything back together and check for ANY areas where the wood rubs against the barrel with a strip of paper. Sand those areas off and then reseal those areas with Tung Oil.





Let dry and then take her to the range to check for accuracy.


This process alone gave me this comparative set of groups.





Next up...we'll get the stock ready for glass bedding.

Thursday, August 13, 2009

Accurizing A CMP Garand #1

Why Have A Garand?




I love that photo and statement from the GI. Too bad that today's media doesn't have the cojones to write something like that.


This project has been a long time in the making.


I bought my CMP Garand a few years ago. My gal is a Springfield Service Grade, which was built between August-September 1944. If you would like to see the build date of your Garand, click here.

This is how she looked when I received her.



When I first got my Garand, I figured that because this was a Service Grade, which meant that the rifle was fit for military service in regards to condition and accuracy, that I would just be able to go out to the range and presto-bingo shoot 1-2" groups all day long.

So I bought some military surplus Korean ammo (more on that later) and headed out to the range.

My first time to the range I was lucky to have two or three rounds in a 5" group. THEN after the rifle heated up, THOSE groups got even larger.


So it was time to work on this rifle.



There are a few things that you should do before starting an accurizing project of this size. First of all I would highly suggest that you go to the CMP website and print off the entire instructions on How To Detail Strip and Re-Assemble your Garand. This will be a fairly large print job, so make sure you have a 3 ring binder and hole punch to keep this in order.

Now, a word about this project. There are two ways you can go about accurizing your Garand. First is to take some (re:a bunch) money and send it off to a 'Garand Smith.' You can get as much accuracy as you can afford. Please don't get me wrong there are things that a 'Smith' can do that you and I cannot. It's a matter of skill, experience and equipment.

Secondly, you can use your God given skills to do some modifications to your own rifle, thereby saving money and in return getting a deeper appreciation for the inner workings and engineering of this marvelous battle rifle. She might not be as pretty as a reparked, restocked WW2 work of art, but she'll go bang every time you pull the trigger and will be much more accurate than what you have now.

What I am posting here is minor cost mods. The tools necessary are your normal gunsmithing screwdrivers, Dremel tool, files, chisels, sandpaper and elbow grease (plenty of that).


First Steps


First things first ok?

I will assume that you have taken your rifle to the range and discovered how she shoots.

So, take some time to break down your rifle, and clean it. If you have a rifle like mine, the barrel spec'd out fairly decent, but never was able to really get a clean patch when cleaning.



I'll explain why the crud keeps on coming.

Back in the 'day.' The Garand was designed for one purpose, and that was to fight and to be maintained by the average GI Joe. Now if you've served in the military you'll know that not every guy was neat, tidy or detail oriented.

The average M1 was used and abused. When the rifle became SNAFU'd it would go to an armorer for repair. The ammo used during WW2 and Korea was primed with corrosive primers and sealed with a substance called 'asphaltum.' Asphaltum is exactly as it sounds...liquid and thin tar like stuff. The ammo was sealed with this stuff to prevent water damage. In the Pacific theater, the Japanese didn't seal their ammo, and many of their soldiers lost their lives from water damaged rounds.

Now, what happens when you have tar sealed rounds fired through a barrel? It tends to accumulate and harden. Now, combine that with corrosive primer residue, improper cleaning and battlefield conditions....you get the picture.

I still am working on getting clean patches out of my rifle. I use Kroils and a brush, and will alternate that with Hoppes and a product called Blue Wonder.
To be candid, I have tried almost everything out there and these three seem to get the lion's share of use and success.



Schematics for reference












Let's start by doing some simple tests to determine issues.

First of all make sure your rifle is UNLOADED.


With the rifle held securely, try to move the receiver in the wood stock with your hand. The receiver 'lock up' is one of the most critical issues that you'll have. What 'lock up' means is how your trigger group locks up to the receiver and to the wood stock. When you have the trigger group unlocked and in a position to either remove or to re-insert, is there pressure during that last 1/4" before your trigger guard clicks into the trigger housing? Is the wood stock beat up and filled with oils or cosmoline? We'll work on that.

Now take your barreled receiver off of the stock. Remove the Op Rod Spring and the Bullet Guide components. Leave the Bolt and Op Rod on. You should be able to move the Op Rod back and forth without the pressure of the spring.

Tilt your Barreled action downward and see if the Op Rod slides easily into the Gas Cylinder. Tilt it back and see if it returns freely. Your Op Rod/Bolt should slide easily into and out of battery. If it doesn't then you'll have accuracy issues.

The first thing to do is to make sure your Op Rod is CORRECTLY bent. Now, this is the only thing that you'll need to send off to have it done properly. Please don't hammer your Op Rod. There is a fellow who does a marvelous and FAST job of correctly working your Op Rod. Jim Schwartz is well respected in the Garand community and has the equipment to correctly spec your Op Rod. Jim's rates are very, very reasonable (in the $20 range)and the turn around time is just a few days. Contact him via email at JSwartz280@aol.com

Now if your Op Rod slides in perfectly, do you feel ANY friction between the Rod and the metal plate in your Front Hand Grip. A quick way to check this is to use a THIN line of Lubriplate on the metal strip and see if any gets on your Op Rod. If it does, then we'll work on that.

Next grab your barreled action by the gas cylinder and see if it twists in your hand. The Gas Cylinder should be rock solid on your barrel. We'll work on that later.

Now remove the Op Rod, take out the bolt, remove the Gas Plug, unscrew the Gas Cylinder Lock and remove the Gas Cylinder. Take off the Front Hand Grip. you should have the Lower Band attached to the barrel. Is it loose at all? If so, we'll work on that one too.

Now take a 1" strip of thin paper and slide it between the Upper Grip and the Barrel. Slide this back and forth to see if the wood rubs on the barrel at any point. This Guard should only touch the barrel at the metal clip. If there is any wood that is making contact, then you'll need to remove that.

As I'm sure you've noticed, the Garand isn't a simple system. The power of the cartridges and the age of your equipment makes this proje3ct not only challenging but very fulfilling to accomplish.


Our plan of action is as follows:

1. Remove the oils/cosmoline from the stock and then seal up the bare wood.

2. Remove any wood that is touching the barrel.

3. Glass Bed the barreled action to create a perfect lock up.

4. Secure both the Gas Cylinder and the Lower Band

Unlike the project I did with the Ruger 10/22, this one will have alot of photos...and will take longer to publish. So please bear with me as I write this over the next week or so.

In the mean time, check your Op Rod, send it to Jim Schwartz if needed and order some Acra Glas Gel.

This isn't a job that will take a couple of hours, it will take some time. So get ready.

Monday, July 20, 2009

Range Report Ruger 10/22 After Rebuild

The tutorial below lays how how I rebuilt my Ruger 10/22. My goal was to correct the group spread by installing a new barrel, bedding the action and free floating the barrel.

After re-zeroing my scope I ran a three shot group at 50 yards using CCI Mini Mag ammo.

Here is that three shot group.




I am pleased with the accuracy. I do have a couple of things that I want to do with this rifle now. I want to reduce the trigger pull to about 3lbs or so and I had a few FTF (failure to fire) so I'll investigate that further.

Wednesday, July 1, 2009

Rebuilding a Ruger 10/22

Rebuilding a Ruger 10/22 rifle














I bought a Ruger 10/22 35 years ago. It was 1973 and I was 18 years old and fresh out of high school. I paid the princely sum of $69 dollars brand new. Right now I think that the 10/22 is going for over $200. That doesn't seem like much of a change in price, but the gun itself has undergone some substantial changes. Now they use Birch wood instead of Walnut and in trying to maximize profits, they've made many short cuts and also many "safety" related changes.

I don't think there is a rifle on the open market that has as many after-market products as does the 10/22. If you want yours to look like a M2 Ma Deuce, or a Thompson sub machine gun, then you'll find the kits to do that. If you want a pink laminated thumb-hole stock...then go right ahead and place your order.

I'm a little different in that I am a wood and steel kinda guy. I like the classics, and the stock 10/22 falls into that category.

Since I bought this 10/22 I have put tens of thousands of rounds through it. I've hunted gray squirrel and ground squirrels, cottontail rabbit, jack rabbits, crows and everything in between. Not to mention beer cans, paper targets and the like. All the while, this rifle has been the most reliable.

I had thought that I would like to rebuild it a few years ago. The accuracy has fallen off and my groups could be measured in 'minute-of-beer can.' I want to clarify, I'm not rebuilding this to be a competition target rifle, but to put rounds inside of a quarter at 40 yds.

Now that I have the parts to do what I would like, I'll walk you through my rebuild. Hopefully you'll be able to take some of the things that I've done and use them for your own rebuild. I also hope that you'll see my mistakes and learn from them.

Let me set the stage for you. I do woodworking, as you have seen by the gun grips that I make. There are some things that if you work on guns, even if it's just to maintain your own guns, that I feel are a must.

Personally I feel that a gunsmithing screwdriver set is a must have. I bought the set made by Wheeler Engineering and sold through Midway USA.

Let's be clear about one thing, there are tools that if you put the word 'gunsmith' in the description of your search that will add about 35-50% to the cost. Some, if not most of those tools are available through regular woodworking sources for substantially less. Also if you have a Harbor Freight near you, then make sure that you check them out. There are a lot of things that I wouldn't buy from Harbor Freight as the quality isn't what I would like, but there are some products that for the price are very good. I'll try to identify some of those products for you in this tutorial.

Here is what I am going to attempt:

Replace the 'Sporter' barrel with a bull barrel
Cut down the stock and add a forend piece, which I will make
Make and add a grip cap to the stock
Hog out the barrel channel to accept the bull barrel and free float that barrel
Make and install a pillar bed for the receiver
Glass bed the barrel for support
Strip and refinish the stock




Here are the parts that I'll install:


Green Mountain 20" fluted Bull barrel


Power Custom Competition Bolt Handle and Spring


Power Custom Extended Magazine Release


Tuffer Buffer



Let's get started.

First of all make sure that your rifle is unloaded.

Now, remove the barreled action off of the stock and remove the barrel band. Take the barrel band and put it in a plastic bag that is labeled. If you don't already have a separate place for gunsmithing parts and stuff, now might be a good time to do that. I use an old fishing tackle box, and it works very well to keep stuff organized. Keep in mind that Murphy's Law will prevail with this project. Just when you think that you have everything, you'll miss a screw, or drop a bolt or something like that.

Remove the shoulder pad off of the stock and also set in a labeled bag. Do the same with the sling studs, if you have them on the stock.

Take your scope off of the receiver. Keep the screws and the Weaver base in a bag. Keep the receiver screw handy, you'll be using this a lot.


Take your trigger group off of the receiver. To do this, punch out the two pins that hold the group in and also take out the bolt buffer which is the rear most pin, which for the most part just falls out by itself.


Please make sure that you set your parts aside in a secure place and label them accordingly.



Wal Mart sells a product called Kleen Strip. This is a paint stripper and it is VERY GOOD. I have used this to take the rock hard finish off of a Remington 700 BDL. I think that this costs about $5.00 for a pint or so. Brownells sells a product that is a 'gunsmithing' quality paint stripper for $20+ shipping. you'll get the same results for a lot less.

We are going to strip the finish off of the stock. We ARE NOT going to sand the finish off of the stock. Why? When the finish is removed, you'll see the dents and dings from knocking about, and we are going to steam those out. When you 'sand' the finish, you'll not remove any varnish IN the wood so removing those dents and dings will not come out as easily.

Use the stripper and a plastic scraper to remove the finish. After you think you have everything stripped off...let it dry and THEN use a 200 (or finer) grit sandpaper to lightly go over the wood. If your sandpaper clogs, in other words if you have shiny spots in the sandpaper, then you still have varnish in the wood and go over it again with the stripper.

Here is my 10/22 after testing the stock with Kleen Strip.





Now lets figure out what to do with the forend piece. There are a couple things you could do. First of all you could do nothing, but that won't work with a bull barrel. The barrel band section that is cut into the stock will look ugly. Secondly, you can 'sand' down the barrel band portion of the stock, but after seeing some guys projects where they have done this, I'm just not impressed.

So, let's remove that piece of the stock and add another to replace it. I chose for this job some Gabon Ebony. You can choose whatever you'd like, just keep in mind that if you plan on using a stock sling stud for a sling, that you want the added wood to be as hard as or harder than the stock itself. The sling stud will be a pressure point and you don't want to pull it out with soft wood.

Get your wood that you are going to use for as forend piece and the stock. Measure about 2" off of the stock, and mark it. I made my mark where the stock became parallel. The two stock lines on the top top of the stock, I'll call these the 'rails' for lack of a better term. Anyway, I also measured about 3" on the Ebony and another 3/4" for the grip cap.

Cutting the Ebony and the Walnut stock has to be done precise. Use a chop saw if you have one...and do all of your cutting at the same time. You want to avoid having to come back later after you put the saw away and set things up again. Why? The cuts you make need to be flush with one another. When you have the saw set up at a 90 degree, or whatever angle you choose, I can just about guarantee that if you put the saw away and then come back to it at a later date it will be slightly off.







After you make your cut, then check the forend piece to see how flush it fits onto the end of your stock.

Take your forend piece and trace the cut stock end to the forend piece with a marker. I laid my stock down on a flat surface with the stock rails on the bottom and then just set the Ebony against the stock and made my tracing (like the photo of the forend piece being smacked with the rubber mallet below). Remember, fresh cut end to fresh cut end.





Now that we have the Ebony traced, I can mark on the stock where I want to drill for my dowels. Harbor Freight has some inexpensive dowel kits. The kit will have dowels, a brad point drill bit and inserts to make the matching holes. I think that their kits are about $4.95 or so. Pretty good value, just keep in mind that the brad point drill bits are junk and will dull up the first time you use them. It isn't the drill bits that are whats good about their kits it is the inserts and dowels.

So make your marks. I used 5/16" for the forend and 1/4" for the hand grip. Drill your holes to about half the length of the dowels. Put a dowel into the hole, if it's tight, then take the drill bit and try to slightly enlarge the hole.






After you drill your holes with the 5/16", now you can put in the insert plugs.




Clamp your stock to your work bench and set your forend piece as close to your tracing as possible. Take a rubber mallet and gently but fairly sharply give a rap to the forend piece.





Now you have the markings to make your corresponding holes in the forend piece. However, on the forend piece we want to go the next size up with our drill bit to 3/8." Why? Well, I can assure you that those holes won't be a perfect match, so by going the next size up, they not only will match, but the extra space will give your glue more area to adhere.

We also want to rough up the interior of the both pieces to give our glue more space and grabbing area. A Dremel tool with a small routing bit works perfecly here. Take your dowels and try on the two pieces. Check for fit. Do the two adjoining edges match up perfectly? If not, then work it with some sandpaper, but they both should be perfect.





Let's talk about making a barrel groove in the Ebony forend piece. Notice in the above photo the rectangular groove. I did this using my router and a 1/2" straight bit. I rigged a jig and measured the width and then routed the groove. I would suggest that you not make the groove too deep, as you'll need some area for the half-round rasp and sandpaper which we'll discuss later.

If you don't have a router, then you'll need a round rasp...in the 1/2" to 3/4" range. Harbor Freight would be a good place for this. This rasp doesn't need to be of any decent quality as all you are going to do is to make a groove of about 3/4" depth. Set your piece in a padded vise and break out the elbow grease.




Now that you have the piece grooved to close to the barrel channel depth and width, it's time to glue up.

Walnut and Ebony are not oily woods. That means you can use a good quality wood glue instead epoxy. Glue up both sides, add the dowels and press together. Compress both pieces together with a pipe clamp, wipe off the glue overage and let sit for 24 hours. After 24 hours take off the clamp and let it rest for a couple of days. You want this to be completely dry.






Now, we're going to do the same thing with the grip cap.

Before I go any further I want to say that you are going to need a GOOD half round rasp. Lee Valley Tools sells a very good half round rasp that does a phenomenal job.

Take your rasp and with the flat side, level off the top of the grip.





Mark your holes for a 1/4" dowel. You've done this with the forend cap, so no need for me to go into detail on this one.

Mark the Ebony cap piece.





Drill and check your work.





You want this piece to be almost finished when you install it.




Groove the inside like you did with the foreend piece.




Glue up and clamp.




When this piece is dried, take your rasp and use it to shape the area around the grip to your liking. I left mine to have a nice palm swell on the right side of the grip. It fits my hand very well.





This is how I have to dress when working on woods. My body reacts violently when exposed to some of the exotic wood dust particles. I don't know how I would do with the Ebony, so I have to gown up in a HazMat suit, asbestos quality respirator and gloves.

The things we go through to have fun!




Here is a shot of some of the tools I used doing this project.

You'll see the Wheeler engineering gunsmithing screwdriver set. Irwin tools makes an incredible drill bit set. These are cobalt and made for working with metals. Brownells AcraGlas Gel for glass bedding rifles. I use the gel because it doesn't run like the regular AcraGlas. The AcraGlas kit contains both parts of the epoxy, release agent...which works very well and black and brown dyes. I also have some Brownells atomized aluminum powder for mixing in with the AcraGlas. this gives the already strong gel another level of hardness.

The large round metal can is Lubriplate. Lubriplate is a white grease that I use for my Garand. I also use Lubriplate for an additional release agent when I glass bed or expoy close tolerance parts.

Also you'll see a spade end drill bit, we'll use that in a few minutes. I have a small chisel and an Xacto knife along with the round rasp and the half round rasp.





At this point we want to keep the Ebony unfinished and unformed. The Ebony block makes a great attachment point in your vise. This will keep the rifle stock away from the vise jaws and allow you to sand, rasp and chisel without problem.


This part of the process takes the most time. Using your rasps and some 80 grit sand paper wrapped around a large socket, you'll need to hog out the barrel channel. Use your barreled action to check your progress. When the barreled action fits perfectly, then go to the next step.

Notice the hose end that is attached to the vise. I have this hose attached to my shop vac to remove dust. I wrapped tape around the end and placed a small 'super magnet' on the end. This is a very handy way to set your dust collector where ever there is metal that attracts a magnet.





Now lets get started with the bedding pillar for the rifle. If you'll notice when you take your receiver out of the stock, the 10/22 only has one attachment point for the receiver. Since we're not going to use the barrel band any longer we will need to strengthen this critical part of the stock. This process will involve making or buying a pillar bed, drilling and inletting an area for the pillar bed...and epoxying everything together.

To start with I decided not to purchase a pre-made bedding kit. I figure that for $20 I could do this myself as it it is pretty simple to do.

I started rooting around for a washer and nut which could do the job. I found a machine screw with washer, which was slightly over 3/4" and a nut. One thing you want to check is that the threads on the nut won't interfere with the threads on the receiver screw. Mine did. So I took the nut and a pair of vice grip pliers and drilled out the threads on the nut. Make sure you use some oil to help cool and lubricate the nut and drill bit when you attempt this...it will get hot. I then took the nut, repositioned it in the vice grips and began to grind the edges, with my bench grinder, to be less than 3/8". No need to make the edges smooth or even. The epoxy will need rough edges to have a surface to adhere to.


Like I mentioned before, the washer was slightly larger than 3/4" in diameter and about 1/16" thick. The bit I used was a 3/4" spade type bit.




Now a spade bit will be flat and have one large protrusion in the center, and two small protrusions on the edges. So when you start to drill, the center will go into your receiver screw hole in the stock, and the small protrusions will start into the wood before the flat cutting edges come into contact. Does this make sense?

I used some JB Weld automotive epoxy and mixed a bit of atomized aluminum powder to give it a bit more strength. When you attach the nut and the washer, you'll need to eyeball it for centering. Now, the epoxy and metal will wander a bit, so don't just epoxy it up and leave it alone, you'll need to compress it. I used my bench vise and made sure that I cleared out the run off inside the holes. You can tell when the epoxy is set by using the mix that you have on your mix paper to test.



Here is a good way to make sure you have this centered. Take the spade bit and without it being in the drill, place it into the receiver hole. Eyeball it up and gently tap with a hammer. The two protrusions will leave a mark. Check to see if the marks are centered...if they are then use your marks as the place to begin your drilling.

Now, you want to be very very gentle at this point. Start your drilling, and if at all possible use a drill press. You want to use the outside protrusions to go to a depth of about 1/16".

Here is what you are trying to achieve.




You see that there is not much wood removed at this point. The spade bit will also give you some 'tear-out'. This means that the outside edges will be slightly larger than the 3/4" of the drill bit. This worked perfectly with my washer and I didn't need to grind any of the washer for a fit. Do you see the area inside the outside edges of the drilled area? Well this needs to be chiseled out.

Using a small chisel takes just a few moments to remove this material. The overall goal is to have your washer/nut combo to be slightly higher than the original bed.

Once you have this done, now let's drill out the area for the nut. Remember I said that I ground down the nut to be slightly less than 3/8"? Well we now want to use the next larger size drill bit, a 7/16" bit. Measure the overall thickness of your nut and mark your drill bit with some tape to give you a reference for depth.

How do we center the bit into the original receiver screw stock hole? If you have a drill press, chuck the drill bit and bring your stock onto the platform. Without the power on get a general idea where the drill is to make contact. Now without a lot of pressure on the stock, turn on the power to the press and GENTLY, GENTLY lower the bit until it barely makes contact. The stock will move as the spinning bit will center itself...now clamp the stock with your hand and drill out your hole.

If you have not done this before you might want to practice with another piece of wood...it works pretty good.

Notice that I have now taken the Dremel tool and routed/grooved the area for the bedding material as a barrel support.



With the holes drilled, check for fit. Again the ideal is to have the washer/nut combo to be slightly higher than the surrounding area.





The epoxy I used for the pillar bedding was some of the inexpensive Harbor Freight 2 part stuff and some atomized aluminum powder.




Tape up the bottom of the receiver and put a small hole so your receiver screw will fit. Use some of the Release agent that came with your Brownells Acra Glas kit. If you don't use Brownells then some Lubriplate grease or any quality lithium grease should do. Make sure you use some grease inside the receiver screw hole and on your receiver screw. Coat all areas where you can think that epoxy might come into contact with wood or metal.

Mix your stuff, insert the barreled action and tighten. You want the barreled action to give you plenty of space in your stocks barrel channel. Mine was up buy at least 1/8" and it was perfect. Let it dry...and leave it alone to cure.


Next we want to tape off the stock and make a dam for the bedding material with modeling clay.



Once you have this done, now take your barreled receiver and tape the bottom and then start applying Release agent. Make light coats. I used three coats and extended the coating along the barrel and into the flutes. Remember Mr. Murphy? This is where he can show up. Apply Release agent to everything...two or three times. If you make a mistake here, you'll have to cut your stock in two and ruin it to get it apart.

Scared? Don't be...just have a healthy respect for the power of this bedding material.

Mix you stuff and if you want to add the coloration to try and match you stock, go ahead. Here is where I made my mistake. Notice in the photo below that the 'cured' bedded flutes are misshapen. What I did was to mix my bedding material, color it and fill up the dammed area. I pressed my bedded action into the clay and inserted the receiver screw. That's how you should do this. My mistake was that I didn't allow for the flutes. They took alot more material than I thought. Once I screwed the action down, I didn't have much in the way of 'squeeze-out.' Squeeze-out is the excess bedding material that should squeeze out of the action. I knew I made a mistake the moment I screwed things together, however, I let it harden to see exactly what I had. This stuff takes about 8-10 hours to harden.

Take a rubber mallet and whack the action to get it to pop out of the stock. Before you do, make sure you remove the received screw (duh) and take an exacto knife to slice away any of the material between the stock rails and the barreled action.




I had a decision to make here. I had abvout 1/3 of the holding area I wanted. So I could leave it alone and be satisfied with a crap job, or chisel the entire thing out and start over, or used this as a base to build on. I decided to take the Dremel and sand out the flutes and rough up the are. I'll redo the bedding part, with an emphasis on filling the flutes.

Now, Mr Murphy decided to poke his head in...I was completely out of brown dye. So I decided to use the Black dye and try to match the color of the barrel. I reapplied the Release agent, made miy mix and re-did my action.

This is what a good squeeze out looks like.




This is what your completed bedding job should look like.






Here are some photos of steaming out a dent.











After you're finished with your bedding job, now finish up the stock.




This is the Gabon Ebony forend piece after sanding and forming. I really like the variegated white color that runs through this wood.



And the finished rifle.








What do you think about this?